Ozone Liteforce V1

The Liteforce is available in two powerful sizes. 6.6m and 7.7m. both packed with power in the lower wind range to enable super early planing. while the light handling also offers a remarkable level of comfort in the upper wind range.

The Liteforce has been developed by combining various design elements from the Ozone Wing series in a strong but lightweight design to deliver easy and very effective performance in light winds.

The carefully developed. compact planform means that the tips are less likely to get caught in the water during maneuvers. ensuring maximum freeride fun in all conditions.

The proven. supportive structure of 125g Performance Dacron at the leading edge and struts helps the Liteforce to handle wind speeds far beyond the limits of large wings.

By using the stiff and robust Performance Dacron material. our designers were able to pre-stress the leading edge so that it deforms significantly less under load. This gives you the confidence to train even when the wind picks up. knowing you can still hang on with more comfort and control.

WHAT YOU FEEL

Very early planing with lots of grunt in the waterEnormous range of action with less need to resize when the wind picks upEfficient pumping with a very direct feelSporty. light handlingVery low drag. which is very helpful when maneuvering upwindClean and easy handling with increasing wind speed

WHY YOU FEEL IT

Compact design for low end power and controlPre-tensioned leading edge and optimized sail shaping for smooth power delivery and controlLeading edge and strut made of Performance Dacron. 20% lighter than conventional DacronErgonomically angled. stiff carbon handles with EVA gripSoft bumper on the front grip attachment to protect the board and headKnuckle protection on the front edge of the De-Power/Surf handleLightweight anti-flap fiberglass battens reduce fluttering of the trailing edge of the wingThe Liteforce is "born light" and has no unnecessary features. Everything has its purpose and every seam is perfectly positioned to increase the genetic strength so there is no need to add unnecessary reinforcements.

TENDON ORIENTED WINDOWS

Two carefully positioned windows parallel to the wing chord on either side of the strut allow you to see other water sportsmen downwind while keeping the wing at a normal riding angle.

(The Flow Wing’s windows are more aligned with the span. as riders have more room above the water to move the wing up and down and back and forth when using the windows).

The Liteforce windows are sized to provide some visual support without significantly affecting the weight and therefore performance of the wing. We advise pilots of all paragliders to always be aware of their surroundings. especially when changing direction. We recommend always lifting the glider overhead to have a clear view of the water downwind before maneuvering.FLY 6 & 7M COMPARISONThe Liteforce is very similar in profile and shape to the Fly. but:

The Liteforce is more performance oriented with stiffer and lighter Dacron material on the leading edge and strut (like the Flux).It also has stiff carbon handles (the Fly has soft handles). which gives it a firmer feel. but also more hand control. especially in very light winds.

FLUX 6.5M COMPARISON

Liteforce wings have more pure low-end grunt for easy power generation in light winds.The Liteforce wings also have a smaller span than the Flux wings. making it easier to prevent the tips from touching the water.

The Flux is a more performance-oriented design that allows for higher tip speeds and tighter lift angles. but requires a more sophisticated technique to pump the Flux in very light winds.